| Brakes_VW Golf/GTI (Mk4) |
 |
RPI-Equipped! Wilwood 10.1" Brake kit
Fits 1.8T/2.0/VR6
$695
|
|
RPI-Equipped! Wilwood 11" Brake kit
Fits 1.8T/2.0/VR6
$795
|
|
|
|
|
|
RPI-Equipped! Wilwood 13" Brake kit
Fits 1.8T & VR6 - 2.0l needs 1.8T spindles
$1395 (shipped)
|
 |
RPI-Equipped! Brembo rotors w/ PBR Metalmaster pads (front)
Cross-drilled & lightweight w/ performance pads. A perfect OEM replacement
$199
|
|
|
|
|
|
RPI-Equipped! Brembo rotors w/ PBR Metalmaster pads (rear)
Cross-drilled & lightweight w/ performance pads. A perfect OEM replacement
$169
|
 |
|
|
|
|
|
| Drivetrain_VW Golf/GTI (Mk4) |
 |
COMING!
Products for this model to be added in the near future, so check back often.
|
|
|
|
|
| Engine_VW MKIV Golf |
 |
Samco Silicone hose kit
Upgrade your OEM rubber hoses for performance.
$219 (w/ hardware)
|
 |
1.8T Samco Air Intake Hose w/ hardware
Proven power increase over stock air tube - Manual trans. only. Clamps and plugs included
$199.99 (shipped)
|
|
|
|
|
 |
AEM Cold Air Intake system for VR6
Gains of up to 15hp!
$249.95
|
|
AEM Cold Air Intake system for 1.8T
Gains of up to 15hp!
$249.95
|
|
|
|
|
 |
Injen Cold Air Intake system for VR6
Dyno-Tuned produce addition 5-8 HP, control max and performance air flow
$269.95
|
|
Injen Cold Air Intake system for 1.8T
Dyno-Tuned produce addition 5-8 HP, control max and performance air flow
$269.95
|
|
|
|
|
 |
Hyperboost Diverter Valve
Increased piston seal, heat-sink body, nozzles are at OEM dimensions, all lubed with Mobil 1
$152 (shipped)
|
 |
Hyperboost Adjustable Diverter Valve
Same as regular valve, but valve spring can adjust from 0-6mm
$192 (shipped)
|
|
|
|
|
 |
Hyperboost HX Diverter Valve
Teflon impregnated piston, reduced turbo lag, smoother throttle modulation, a must for chipped cars
$172 (shipped)
|
 |
Forge RACE DV
RACE Closed Loop Diverter Valve (diaphragm)
$165 (shipped)
|
|
|
|
|
 |
Forge DV
Fast Road Closed Loop Diverter Valve (piston)
$145 (shipped)
|
 |
Forge Race DV
Fastest response for modified engines,360°rotating vacuum port,comes with spare diaphrams and alternative springs
$175 (shipped)
|
|
|
|
|
 |
FMDVTUN Forge DV tuning kit
Fine tune your BPV w/ this complete kit
$28 (shipped)
|
 |
Forge DV
Fast Road Flusht Fit,360°rotating vacuum port,Billet Aluminum
$160 (shipped)
|
|
|
|
|
|
GHL Cold Air Intake 1999-2004 1.8T
One piece unit including K&N filter
$209 (shipped)
|
|
GHL Cold Air Intake 1999-2004 VR6
One piece unit including K&N filter
$209 (shipped)
|
|
|
|
| Exhaust_VW Golf/GTI (Mk4) |
 |
GHL 2.5" Cat-Back Dual Tip Exhaust
For 1.8T. Stainless Steel construction,dual 3-inch round tips
$729 (Shipped)
|
 |
GHL 2.5" Turbo-Back Dual Tip Exhaust
For 1.8T. Stainless Steel construction,dual 3-inch round tips
$959 (Shipped)
|
|
|
|
|
|
GHL 3" Cat-Back Dual Tip Exhaust
or 1.8T. Stainless Steel construction,dual 3-inch round tips
$829 (Shipped)
|
|
GHL 3" Turbo-Back Dual Tip Exhaust
or 1.8T. Stainless Steel construction,dual 3-inch round tips
$1129 (Shipped)
|
|
|
|
|
 |
GHL 337/20th Aniv. 2.5" Cat-Back Exhaust
Single 3.5" tip. For 1.8T. Fully polished
$749 (Shipped)
|
 |
GHL 337/20th Aniv. 2.5" Turbo-Back Exhaust
Single 3.5" tip. For 1.8T. Fully polished
$969 (Shipped)
|
|
|
|
|
|
GHL 337/20th Aniv. 3" Cat-Back Exhaust
Single 3.5" tip. For 1.8T. Fully polished
$838 (Shipped)
|
|
GHL 337/20th Aniv. 3" Turbo-Back Exhaust
Single 3.5" tip. For 1.8T. Fully polished
$1129 (Shipped)
|
|
|
|
|
|
GHL 2.5" VR6 Cat-Back Exhaust
Dual 3-inch tips, for VR6 only
$729 (Shipped)
|
 |
GHL 2.5-inch Downpipe w/ Hi-Flo Cat
Open up that restrictive stocker
$409 (Shipped)
|
|
|
|
|
|
GHL 3-inch Downpipe WITHOUT Hi-Flo cat(Race Only)
$429 (Shipped)
|
|
GHL 3-inch Downpipe w/ Hi-Flo Cat
Open up that restrictive stocker
$529 (Shipped)
|
|
|
|
|
 |
Milltek Golf 1.8T Cat-Back Exhaust
2.5" system,for 4Motion valance or 2002.5-2003 stock valance, cars prior to 2002.5 need to buy updated valance from dealership
$680 (Shipped)
|
|
Milltek Golf VR6 Cat-Back Exhaust
2.5" system,for 4Motion valance or 2002.5-2003 stock valance, cars prior to 2002.5 need to buy updated valance from dealership
$680 (Shipped)
|
|
|
|
|
 |
Milltek R32 Cat-Back Exhaust
Power gains and the sound you want,choose resonated or non-resonated
-Listen-
$980 (Shipped)
|
|
Milltek Golf 337/20th Anniv/1.8T Cat-Back Exhaust
Mandrel bent piping,%12 hp increase in 1.8T
-Listen-
$685 (Shipped)
|
|
|
|
|
 |
Milltek 1.8T 3"-2.5" Downpipe/Cat
More flow straight out of the turbo!
$630
|
 |
Milltek R32 HiFlow Cat
Power gains and the sound you want,choose resonated or non-resonated
$1070 (Shipped)
|
|
|
|
| Exterior_VW Golf/GTI (Mk4) |
|
COMING!
Products for this model to be added in the near future, so check back often.
|
|
|
|
|
| Intercoolers_VW MKIV Golf |
 |
Forge uprated Side Mount Intercooler
13hp & 2ft/lbs @ wheels - Easy install
$595
|
 |
Forge Front Mount Intercooler
Up to 10hp increase and 15ºC decrease in intake charge. Includes all hoses, clamps, & modified crash bumper
$995 (+ $25 shipping)
|
|
|
|
| Interior_VW Golf/GTI (Mk4) |
|
COMING!
Products for this model to be added in the near future, so check back often.
|
|
|
|
|
| Suspension_VW Golf/GTI (Mk4) |
|
COMING!
Products for this model to be added in the near future, so check back often.
|
|
|
|
|
| Wheels |
 |
|
Renn-Art carries an extensive range of quality alloy wheels from the following companies:
|
- SSR
- OZ Racing
- BBS
- HRE
- Volk Racing
- Racing Hart
|
- AC Schnitzer
- Oettinger
- TechArt
- Centerline
- Replica
- SPP (Supreme Power Parts
|
| For current styles, sizes, fitments, prices and availablity please contact us at (866) RENN-ART or via email. |
|
|
|
